Changelog

Version 5

v.5.9.2.0

Update

  • #3584 – All popups changed to new method of opening and closing
  • #3592 – Default location options:
    • Resource location options when starting new project
    • Report Template location options when generating reports
  • #3600 – Custom Resource location, Custom report location and Language choice stored on PC to persist between opening and closing
  • Chinese translation corrections including default Chinese translation of SRS

v.5.8.3.0

Update

  • #3489 – Corrected duplicating a Hazard causes an error when saving
  • #3499 – Don’t allow users to open files created in newer version
  • #3537 – SRS Layout tidy
  • #3532 – SRS auto SIL Data tab ignores Logic Branches
  • #3510 – Link to Downloads area added to the upgrade to latest version message when update available
  • #3550 – SRS updated to distinguish between SIL Achieved and Max SIL Arch.
  • More Report Template tweaks
  • More German and Spanish language tidies

v.5.8.2.0

Update

  • Configurable SRS Module (#3469)
  • Chinese translation available in main version (#2890)
  • Default Report Templates (#3437 & #3443)
  • Human Error Events updated to allow use in Config XML files (#3474)

Minor BUG

  • Demand Rate calculation updating correctly (#3408)
  • DATA Comp error corrected when loading Item when Element based on Custom Failure Rate (#3479)

v.5.7.1.3

Update

  • Risk Graph tool updated (#3143)
    • Can now update Consequences texts
    • Can now set SIL Target Levels
    • Uses Risk Graph model from IEC 61511
    • Warnings added to ensure Risk Graph is calibrated for each new project

Minor BUG

  • Correction of deleting PHA Actions Assignees (#3413)

v.5.6.2.0

Minor BUG

  • Resolve error in Sensitivity Analysis tool when Element is used twice in RBD (#3993)
  • Assessment Report generation corrected to work from Dashboard (#3291)
  • Determination Type setting corrected set on Editing (#3393)
  • Limit in Proof Test and PAT Interval removed (#3367)
  • Item Demand Rate fixed (#3408)

v.5.6.1.0

MAJOR Update

  • New DATA Comp module added to ProSET for operation and maintenance data collection.  For more details check out the DATA Comp Overview Knowledgebase article.

Minor BUG

  • SIL Verification Report Worksheets rows fixed to correct layout issue (#3304)

v.5.5.2.0

Minor Update

  • Update Continuous Demand Mode to better display Mitigated Event Freq (#3038)
    • Mitigated Event Freq removed when in Continuous Demand Mode
    • Total IPL and Total Modifier Factors shown for each IE
    • Total IPL and Total Modifier Factors for all IEs shown in Consequence Results and in Target Selection
    • Report Updated
  • Check if file is locked before saving (#3186)
  • Assumptions now exported to the SRS and SIL Verification Reports (#3148)
  • Deactivation warning updated to state deactivation is not needed to upgrade (#3197)
  • Disable ALARP.  ALARP will be reinstated in a future version (#3213)
  • Disable Risk Graph.  Risk Graph will be reinstated in a future version (#3143)
  • Node added to SIL Determination, SIL Verification and SIL Assessment worksheets (#3250)

Minor bug

  • Assessed Deviation on Dashboard spelling corrected (#3008)
  • PFD Target & SIL Target heading order corrected in Consequence Results in LOPA Tab (#3013)
  • Consequence selection removed from Hazard Description form when Determination Method is not LOPA or BOTH (#3019)
  • Bug resolved where IPL Tag not enabled to Edit in New when selecting an Existing IPL (#3028)
  • Correct Pass/Fail criteria to Pass when SIL Target is None (#3071)
  • Correct Report Generation when “/” in Project Name (#3189)
  • IPL Tag and consequence Enabled updated when using Existing IPLs (#3028)
  • Delete IPL warning corrected (#3206)
  • Corrected link to PHA Comp button on dashboard (#3227)
  • Notes & Recommendations copied when duplicating a Hazard and Notes copied when duplicating a Node (#3256)

v.5.5.1.0

Major Update

  • LOPA Interface Upgrade
    • Click to add/remove IPL or Condtional Modifier from Initiating Event
    • Change Consequence drop-down option to view Consequence summar results
    • Conditional Modifier updated to new model. Now a Conditional Modifier will only have one Factor value per consequence
    • Consequence Edit moved to Hazard Edit form
    • IPLs Manager in Tools -> SIL Determination -> IPLs Manager updated to new model
  • Dashboard Added showing overview of SIL Determination and SIL Verification
    • Navigate back to Dashboard via Module switching drop-down
  • Error Handling updated
    • Log file saved to Desktop on crash
    • Project file saved as backup to Desktop

Minor Update

  • Warning and Unsetting of Selected Target if Consequence set to Not Applicable
  • Warning if Trial user that can only view simplified Failure Rate DB
  • Better Recalculation of PFD/PFH and Verification Result
  • “Show Details” button added to show/hide Hazard Details on Hazard Page

v.5.4.4.0

Minor Bug

  • Trial Upgrade text corrected
  • Trial License permissions updated to allow access to project settings
  • Report Generation menu item intermittent disabled state corrected

v.5.4.3.0

Minor Update

  • Language switching added to Tools menu

Minor Bug

  • Import from PHA Comp corrected when no Consequence Category set
  • Link from PHA Actions Review to Node Deviation corrected when in SIL Comp
  • New Project menu icon resolved

v.5.4.2.0

Minor Update

  • Additional SIL Verification Result States added (“Unverified” and “No Target”)
  • SIL Verification Result style updated
  • Table widths standardised in Verification Report
  • Devices used in Hazard shown in each worksheet in Verification Report

Minor Bug

  • IPL Register corrected in Assessment Report
  • Verification Result corrected when Consequence Target is determined to be None

v.5.4.1.0

Major Update

  • Translation – English, Spanish, German
  • DataGrid buttons on selected rows
  • RiskProfile update
    • More flexible RiskProfile configuration from within config XML files
    • Better validation on Consequence
    • Can modify the Consequence Category title within ProSET
    • Remove reset and import/export feature
  • ProSET Viewer
    • License updated for new license type
    • Includes flags to allow
      • AllowSensitivityAnalysis
      • AllowVerification
      • AllowSIL_Comp
      • AllowPHA_Comp
      • AllowReportGeneration
      • AllowProjectSettings

Minor Update

  • Correction of Formatting of Decimal numbers
  • Correction of IPLs and CMs in Reports

Minor Bug

  • “-” delete buttons visibility corrected when editing RBD branch

v.5.3.0.0

Major Update

  • Language specific version – Not available for normal download

v.5.2.12.0

Minor Update

  • <Update based on feedback from Cepha Controls>
  • Allow column resize on Manage Elements Overview
  • Manage Elements Overview now full width
  • Add Hazard details rows to the Worksheets in Verification Report

v.5.2.11.0

Minor Update

  • Text checked for invalid XML characters

v.5.2.10.0

Minor Update

  • Risk Ranking config updated to support more Consequence Categories

v.5.2.9.0

Minor Update

  • About ProSET page update

v.5.2.8.0

Minor Update

  • Licensing update

v.5.2.7.0

Minor Update

  • Increase Risk Profile description limit (set to 10,000 characters)

v.5.2.6.0

Minor Update

  • Default PST interval set to 0
  • Events on IPLs are now always Enabled – Disabled states were confusing

Minor Bug

  • IPL corrected when adding Existing IPL at Hazard level

v.5.2.5.0

Minor Update

  • Software license agreement added to installer

v.5.2.4.0

Minor Bug

  • Managing IPLs/Modifiers at Hazard level corrected for Delete and Use As New

v.5.2.3.0

Minor Update

  • Default Initiating Events updated to reference original Data Source as Justification

v.5.2.2.0

Minor Update

  • SIL (Arch) failures highlighted if causing Fail in Verification Branch Overview
  • SIL (Arch) and PFD Achieved highlighted if causing Fail in Verification Results
  • Ability to turn off RiskRanking columns in report added to code, can not be enabled/disabled within UI yet

Minor Bug

  • SIL Architecture result now updated correctly on change of branch data

v.5.2.1.0

Major Update

  • Import from PHA Comp to SIL Comp
    • single Hazard import via Add New Hazard
    • Import All via Tools -> Import

Minor Update

  • Unique Safeguard updated to include blank descriptions (ie. Blank Description and Tag must be a unique pair)
  • IPLs can be managed at a Hazard level (as well as Event and Project level)
  • SIL Verification Defaults added to Project Overview form
  • Warnings shown when adding a Conditional Modifier when no Consequences selected on Hazard
  • Verification Report updated to add Result to RBD worksheets
  • Default Consequence in PHA Comp for “No significant Consequences”
  • Import SIFs renamed to Import Hazards
  • Import submenu added to Tools in Header menu
  • Remove “ESC” from texts
  • Remove max width from popups allowing some popups to be full width

Minor Bug

  • Sensitivity Analysis updated to show proposed PFD when no Targets set

v.5.1.13.0

Minor Update

  • Removal of use of “Table Grid” table style in Report Generations

v.5.1.12.0

Minor Update

  • Report Generation error handling tweaked to display stack trace better and report original exception

v.5.1.11.0

Minor Update

  • Deviations now loading from My Documents
  • Addition of Resource Language files in preparation for translations update
  • Some reworking of menu and title text for consistency

v.5.1.10.0

Minor Update

  • Update of Failure Rate Date

v.5.1.9.0

Major Update

  • Correction of conversion between text input and scientific notation

v.5.1.8.0

Minor Update

  • Corrected location of lookup files to correct double-click open not correctly finding new XML files

v.5.1.7.0

Minor Update

  • Determination report error resolved if CM and IPL count gets out of synch
  • Risk Graph edit resolved
  • PFH MooN calculations corrected when M = N
  • Addition of new Conditional Modifiers corrected to resolve issue with IPL search

v.5.1.6.0

Minor Update

  • Financial and Environmental risk matrix updated
  • Failure Rates stripped to only include default FARADIP Data

v.5.1.5.0

Major Bug

  • Crash resolved in Safeguard Form caused by null Description or Tag fields being searched causing a NullReferenceException

 Minor Update

  • Risk Profile updated to new ESC standard

 v.5.1.4.0

Major Bug

  • HAZOP Worksheet header row widths corrected in PHA report
  • Determination report corrected to handle IPL and CMs with justifications properly
  • SRS field alignment corrected

v.5.1.3.0

Minor Bug

  • Resolved error caused by deleting a Node in PHA Comp without deleting child Safeguards and Actions

Major Bug

  • Error above results in errors during Report functions. Skip orphan actions if they do occur
  • Hazard Status corrected to update when changing between Hazards

v.5.1.2.0

Minor Bug

  • Licensing issue in Release mode corrected

v.5.1.1.0

Major Update

  • PHA Actions moved to apply to a Cause
  • Default Actions Added
  • Safeguards must be unique
  • Safeguards now re-usable
  • PHA Risk Ranking Added (includes Report Template update)
    • Including Risk Matrix viewer
  • Deviation “Assessed” criteria updated to include providing a consequence

Minor Update

  • Justification added to IPL
  • Copyright updated to 2016

Major Bug

  • IPLs corrected in Reports when Factor is 1 to show in Worksheets and excluded from IPL register
  • Continuous Demand default IE added when creating a new Hazard
  • SIL & PFD Targets update when changing IPL/Modifier from IPL Manager (Header -> Actions)

Minor Bug

  • Assignee Popup texts corrected (was using Drawing Number)
  • Remove “Duplicate Drawing Number” option
  • IPL counts update properly
  • Existing IPL clear search function corrected
  • Event Frequency updated to account for Human Error (Display on Events list only)
  • New Project corrected when created from Header

v.5.0.4.0

Minor Update

  • Client specific Failure Rate Version

v.5.0.3.0

Bug

  • Installer corrected

v.5.0.2.0

Minor Update

  • Client specific Failure Rate Version

v.5.0.1.0

Major Update

  • Name updated to ProSET
  • All data tables updated
    • Sortable
    • Filterable (dropdown box within column)
    • Searchable (search box top right of table)
    • Reorderable (not on all tables)
    • Resizable columns and/or rows (not on all tables – black lines in column headings for resizing columns)
  • PHA Comp
    • Switching between Modules (PHA Comp & SIL Comp)
    • Deviations Manager
    • Assignee Manager
    • Review Actions
    • Report Generation
      • Full Report
      • Actions Report
    • Drawing Number Manager
    • IPL / Modifier Manager
      • bulk adding IPL / Modifier to other events
      • Modifiers now added to IEs rather than Hazards
      • Upgrade of old Project files to new IPL and CM standard
    • All lookupdata (including Failure Rate data and Risk Graphs) can be loaded from MyDocuments
    • Local user data (lookup XMLs and Report Templates) moved to ProSET folder within MyDocuments

Minor Update

  • “New Project” popup moved to Welcome screen
  • Notes and Recommendations turned into multiple elements with Add/Edit/Delete type tables
  • Custom (SIL) renamed Custom SIL
  • Custom (PFD) renamed Custom PFD
  • Auto Complete function added – used in Action Assignee, Deviation Manager, Drawing Numbers in Hazards and Nodes
  • Dependencies in Optimiser limited to 2 rows
  • About Page added
    • Software version
    • License details

Major Bug

  • IE Frequency updates on change
  • Duplicate IPLs can not be added to an Event

Minor Bug

  • New instance of object (ie Hazard, IPL) is not created until save to ensure IDs are not used when Add New is cancelled
  • Vertical scroll bar visible at all times (stops width changing between pages)
  • Data Import fixes
    • Initiating Event import messages corrected (was referencing SIFs)
    • Import of Custom SIL Targets corrected
  • Result shown as pass (green tick) when Custom SIL is None
  • Result shown as pass (green tick) when SIL Target is None even if no Verification carried out
  • FailureRateDU2 corrected and updated in PFD calculation (spec from Mohammed)
  • IDs reset on all models when creating new or loading project files
  • Copying Device now does not create duplicate CustomFailureRate, and links to the original CustomFailureRate
  • Results (PFD and Pass/Fail updated on new Hazards when Duplicating
  • Can not edit the Subsystem when editing a CustomFailureRate
  • Devices updated to correctly use the next available ID
  • “Add Custom Failure Rate” button not shown when editing an Element
  • Branches re-calculated on update of CustomFailureRate data
  • Addition of Branches menu updated on change of Devices (subsystem types available)
  • All views refreshed when navigating to a Hazard